Visit Our Website

 

How do you feel about How to Unclog a Toilet Without a Plunger ?

When your bathroom malfunctions and also congest, it is more than a small trouble. A connected commode that backflows with filthy water is also horrible as well as hazardous to your wellness. Furthermore, it disrupts your house completely since everyone requires access to the commode throughout the day. Luckily, you can still attempt to remove the clog on your own with these convenient suggestions:

 

Obtain a Plunger

The bettor is the top device for unclogging toilets. Actually, every house should have one due to the fact that they work so successfully. First, see to it you obtain a big enough size to cover the hole in your commode. After that, place the plunger and also gently push it down initially to eliminate air. This produces the suction you need to remove the obstruction. Once you have actually obtained a great seal, you can dive down vigorously. If you're handling unclean water, put on gloves, mask, safety glasses, and use old clothing in case you obtain sprinkled. You may require to pump the bettor numerous times until the blockage loosens up and also the flow is restored.

 

Usage vinegar and Baking Soda

Dependable household staples like vinegar and baking soda will certainly can be found in helpful. In addition to using them for cooking cleaning surface areas and also functioning as deodorizers, these 2 miracle compounds can remove blockages well. Most importantly, they are safe and also will certainly leave your commode scenting fresh and also tidy. Right here's what you need to do:

 

• Put a mug of cooking soda right into the bathroom


• Gather 2 mugs of vinegar


• See the carbonated activities as they put bubbles


• Flush the toilet


• You may need to repeat the process a few times up until the blockage is totally gone. The chain reaction the results from combining these two will function well in softening blockages.

  Attempt Ordinary Meal Soap as well as Hot Water

  
  Boil one gallon of hot water in your pot. Next off, put some nice-smelling liquid dish soap onto your toilet. Once the water boils, put it carefully right into the commode. Wait on around 15 mins for this mixture to work its magic. The hot water and also soap are intended to soften the obstruction. Additionally, you can use your shampoo, as well. After this treatment, you need to have the ability to flush the commode without worries.

  Buy a Bathroom Snake

  
  A commode snake is a fairly economical apparatus in your equipment shop. Best of all, anyone can use it, even someone that isn't a handyman. All you need to do is poke the gadget in the toilet to unclog it. Nonetheless, it can get truly untidy because you need to use your hands and bend down to get to the clog.

  Just how To Unblock the Toilet Without a Bettor

  
  The most effective method to handle a clogged up bathroom is to use a bettor but there could be scenarios where you don't have accessibility to one. If If the bathroom is obstructed as well as you do not have a plunger convenient, have no worry. There is greater than one means to clean out the commode and several of these methods consist of common family items that you likely currently have. If a blockage is certain problematic, you might need to utilize a drainpipe snake to unclog it. Yet these natural home remedy will aid push with a few of the extra small obstructions you're most likely to run into.

  Put Household Bleach as well as Powdered Soap

  
  Bleach like Clorox succeeds to break down waste. Just follow the recipe soap instructions. Replace the soap with 3 mugs of bleach. After a number of minutes, pour in powdered soap. Await 15 minutes as well as flush the bathroom. This combination will assist break down any kind of waste and also clear the blocked bathroom.

  Include Hot Water

  
  If recipe soap alone does not do the trick, adding water may relocate points along. Load a bucket with hot bathroom water (boiling water could cause a porcelain bathroom to fracture) and also put the water right into the commode from waist level. The force of the water can displace the reason for the blockage.

  Require Expert Aid

  
  While the remedies over are dependable and practical, they might be fairly unpleasant if you have actually obtained a persistent obstruction that will not budge. The very best point to do in this circumstances is to call an expert plumber. They can manage your blocked toilet and examine your drainpipe system with a drain camera inspection to see if you have actually obtained any kind of bigger issues.
  

  5 Ways to Unclog a Toilet

   

  Tried and True: Use a Plunger

   

  It's not very high-tech, but a plunger remains your best first option when faced with a clogged toilet. The key here is to use the right kind of plunger for the job. You'll want to use a toilet plunger versus a sink plunger. These plungers have a bell shape with a cylindrical sleeve coming out of the bottom. This sleeve fits into the drain hole of the toilet bowl while the surrounding rubber cup forms a tight seal. (Sink plungers lack this sleeve and won't be as effective.)

   

  To get the job done, make sure there is at least enough water in the bowl to cover the drain hole, then angle the plunger so that the sleeve extends into the hole. Using short, sharp, strong strokes, move the plunger up and down several times. Remove it from the bowl and flush. Repeat if necessary.

   

  Snake It!

   

  Sometimes plunging is simply not effective when trying to unclog the toilet, so you may want to have a go with a snake. This device is a long semi-rigid coil of wire that has a corkscrew-style tip on the end. There’s a range of toilet snakes to choose from, but your best bet is one called a closet or toilet auger, which is a bit more heavy-duty and designed specifically for getting around the twists and turns in a toilet bowl.

   

  To use it, insert the tip of the auger into the drain hole and crank the handle in a clockwise direction. Eventually, you should feel the tip of the auger stop working its way down the toilet, which means you have found the clog. At this point, push the auger forward and back a few times until you feel the clog break up. Then, rewind the auger and flush the toilet.

   

  Get the Hang of It

   

  If you don't have a snake or auger on hand, you can get much the same result by unwinding a simple wire hanger. You can leave the curved part of the hanger intact to act as a hook, but you may want to cover it with a bit of electrical tape or duct tape to protect your toilet's porcelain surface. Feed the unwound hanger hook end first down the drain and when you hit the clog, work it back and forth to clear. Use rubber gloves to keep your hands clean.

   

  Brush Bonus: In a pinch, you can try using your toilet bowl brush to work the clog free. The brush will have a harder time handling the curves of the bowl and won't extend as far as a snake or hanger, but if the clog is relatively close to the opening of the drain hole at the bowl, it might just do the trick. You'll definitely want to wear long rubber gloves for this procedure as you'll need to reach pretty far down for the best chance of success.

   

  Soap Up

   

  If mechanical methods of removing your clog fail (or if you don't have the tools you need to execute them), you might want to try chemical methods. The easiest way to try this out is to squirt about 1/4 cup of liquid dish detergent into the bowl. Let it sit for about 15 minutes so that it has a chance to travel through the water and into the drain, where it will hopefully surround the clog and lubricate it. Follow this up with a pot of very hot water that's just below the boiling point, and the clog should rinse free.

   

  Make A Clog-Clearing Recipe

   

  Your kitchen can be the source of more clog-busting help in the form of the tried-and-true duo of vinegar and baking soda. Because this creates a fizzy reaction, you may want to remove some water if your toilet bowl is filled to the rim, or at least put some old towels around the base to catch any spillover. Then put one cup of baking soda and one cup of vinegar in the bowl and let it go to work for about a half hour. Follow up with piping-hot water, and hopefully, the clog will have dissolved enough for you to get back to flushing success.

  https://www.homeserve.com/en-us/blog/how-to/unclog-backed-up-toilet/

  
  

  Do you enjoy reading up on Reasons Your Toilet Keeps Clogging? Write a remark down the page. We would be interested to listen to your reactions about this blog posting. Hoping that you visit us again later on. Appreciated our blog entry? Please share it. Let another person discover it. Bless you for your time. Don't forget to come by our website back soon.

  
  Schedule Your Service

See Availability

 

 

Listed here below you can get additional really good resources when it comes to How to Install a Bathtub: Install an Acrylic Tub and Tub Surround.

Setting up a bathtub isn't exactly rocket science, but it does require solid plumbing, carpentry, and sometimes, tiling skills. Replacing an old bath tub with a brand-new one is likewise a moderately difficult project. If the old bathtub is conveniently obtainable, the task can relocate immediately; if you have to open a wall to remove the old bathtub and position the new bath tub, the job is a lot harder. In either situation, the job is within a home handyman's skills, although you will certainly require an assistant to leave the old tub as well as set in the new one. Make sure you have actually certified on your own for the job and fit trying it. Instead of employing a contractor to take control of a halfway-completed project, it is better to take into consideration using one before you begin. Opportunities are you might need a professional plumber to make tube links.
This post will assist you install a brand-new bath tub in your restroom if you have currently gotten a new tub and do not require to alter the arrangement of your previous supply of water pipes.
Your tools and also product checklist should consist of the following:

 

• New Bath tub


• Hammer


• Pipeline Wrenches


• Prybar


• Safety Glasses


• Degree


• Pliers


• Flexible Wrench


• Putty Knife


• Screwdriver


• Cold Knife


• Tape Measure


• Pipe Caps


 

Planning for the Installment

First of all, the sustaining structure supplied with the bath needs to be fitted (if needed) according to the producer's guidelines. Next, fit the taps or mixer to the bathtub. When suitable the tap block, it is important to see to it that if the faucet comes with a plastic washing machine, it is fitted between the bathroom and the faucets. On a plastic bath, it is also reasonable to fit a supporting plate under the faucets unit to avoid strain on the tub.
Fit the flexible tap adapters to the bottom of the two faucets using 2 nuts and also olives (sometimes supplied with the bathtub). Fit the plug-hole outlet by smearing mastic filler round the sink electrical outlet hole, and after that pass the outlet with the hole in the bathroom. Use the nut provided by the manufacturer to fit the plug-hole. Take a look at the plug-hole electrical outlet for an inlet on the side for the overflow pipeline.
Next, fit completion of the adaptable overflow pipe to the overflow electrical outlet. After that, screw the pipe to the overflow face which must be fitted inside the bath. Ensure you make use of all of the supplied washing machines.
Connect the trap to the bottom of the waste electrical outlet on the bathtub by winding the thread of the waste electrical outlet with silicone mastic or PTFE tape, and screw on the trap to the electrical outlet. Attach the bottom of the overflow tube in a comparable manner.The bathroom should now be ready to be suited its last position.

 

 

Removing Old Taps

If you require to change old taps with new ones as a part of your setup, after that the first thing you should do is detach the supply of water. After doing so, switch on the faucets to drain pipes any water staying in the system. The procedure of getting rid of the existing faucets can be quite problematic because of the restricted gain access to that is commonly the case.
Utilize a container wrench (crowsfoot spanner) or a faucet device to undo the nut that connects the supply pipes to the taps. Have a fabric all set for the continuing to be water that will come from the pipes. As soon as the supply pipes have been removed, use the same tool to loosen the nut that holds the taps onto the bath/basin. You will certainly require to quit the solitary faucets from transforming throughout this procedure. When the faucets have actually been gotten rid of, the holes in the bath/basin will certainly need to be cleansed of any kind of old securing substance.
Prior to moving on to fit the brand-new faucets, contrast the pipeline links on the old faucets to the brand-new faucets. If the old faucets are longer than the brand-new faucets, after that a shank adapter is required for the new taps to fit.

 

 

Setting up the Bath tub

Making use of both wood boards under its feet, put the tub in the needed setting. The wooden boards are valuable in evenly spreading the weight of the bathtub over the area of the boards instead of concentrating all the weight onto 4 little points.
The next goal is to ensure that the bathtub is leveled all round. This can be attained by examining the level and also changing the feet on the tub up until the level checks out level.
To install taps, fit all-time low of the outermost versatile tap adapter to the proper supply pipe by making a compression join; after that do the exact same for the various other tap.
Activate the water system as well as check all joints and also new pipework for leakages as well as tighten them if required. Fill the tub and additionally check the overflow electrical outlet as well as the normal electrical outlet for leaks.
Ultimately, repair the bathroom paneling as explained in the manufacturer's user's manual. Tiling and securing around the tub must wait until the bath tub has been made use of a minimum of when as this will settle it right into its final placement.

 

 

Fitting New Touches

If the tails of the new taps are plastic, after that you will require a plastic connector to stop damage to the string. One end of the connector fits on the plastic tail of the faucet and the various other end provides a link to the existent supply pipelines.
If you require to fit a monobloc, after that you will call for decreasing couplers, which attaches the 10mm pipe of the monobloc to the basic 15mm supply pipeline.
Next, place the tap in the mounting opening in the bath/basin ensuring that the washers remain in location in between the tap and also the sink. Protect the faucet in place with the maker provided backnut. When the faucet is securely in place, the supply pipes can be attached to the tails of the taps. The taps can either be attached by using corrugated copper piping or with typical faucet connectors. The former kind should be linked to the faucet finishes initially, tightening only by hand. The supply pipelines can later on be connected to the other end. Tighten up both ends with a spanner after both ends have been attached.

 

 

Tiling Around the Bathtub

In the location where the bath satisfies the floor tile, it is required to seal the accompanies a silicone rubber caulking. This is important as the fitting can relocate enough to break an inflexible seal, causing the water to penetrate the wall between the bathroom and also the tiling, leading to difficulties with dampness and possible leakages to the ceiling listed below.
You can pick from a variety of coloured sealants to blend in your components and also installations. They are marketed in tubes and cartridges, and can securing gaps up to a width of 3mm (1/8 inch). If you have a larger space to load, you can load it with spins of drenched newspaper or soft rope. Remember to always fill the bath tub with water prior to securing, to permit the activity experienced when the tub is in use. The sealant can crack fairly early if you do not consider this motion before sealing.
Conversely, ceramic coving or quadrant floor tiles can be used to edge the bath or shower tray. Plastic strips of coving, which are easy to use and also reduce to dimension, are also easily available on the market. It is advisable to fit the floor tiles making use of waterproof or waterproof adhesive and cement.

 

A Step-by-Step Guide to Installing a Bathtub

 

Is your bathtub looking a bit dated lately? Believe it or not, installing a new one is a project you can do yourself. Whether your bathtub is broken or doesn’t fit in with your current bathroom’s design, you can fix it without having to hire a contractor or paying labour costs.

But, beyond saving money, there are other benefits of installing your own bathtub. When you do this project yourself, you can customise every step of the process. You can also make sure the finished product looks exactly the way you want it to.

This DIY project is quite involved, but by doing some research, preparing your bathroom and using the right equipment, it is definitely one you can take on. This guide will help you understand the technical procedures behind installing a new bathtub.

 

Remove the Existing Bathtub

 

To remove the old bathtub, you will need to turn the water supply off before you start any work. After you turn the water off, there will likely still be some water left in your plumbing system, which you can remove by turning on a faucet below the level of the bathtub. Once the water stops running, you are ready to start working.

The easiest way to remove the tub is to remove the faucet, handles and other piping and then pull the tub out from the wall. If this doesn’t work in your situation, you will need to remove part of the wall, remove the piping and then slide the tub out.

 

Choose the Right Bathtub

 

The ideal way to replace your bathtub is to find one that has the exact dimensions and has the drain and faucet on the same side as your old one. This way, it will fit in the same place and you won’t have to change the piping system in your bathroom. Choose a tub that matches your home’s decor and fits with the style of the bathroom.

 

Install the Plumbing and Ledger Board

 

You can purchase a tub drain kit at a hardware store which will have all the pieces you will need for your new tub’s plumbing. Follow the instructions that came with the kit to install the plumbing in the new tub and then take measurements to make sure the plumbing in the tub will align with the plumbing in your bathroom. If it doesn’t, now is the time to make necessary adjustments.

Some bathtubs need a ledger board that is installed on the wall behind the tub to help support it. If your new bathtub requires one, the directions that came with it will tell you how high it should be installed. If your old bathtub had a ledger board, and it is still in good condition, you can adjust its height to match the new bathtub.

 

Install the Bathtub

 

When the plumbing and ledger board are ready, you can install the new bathtub. Carefully lower it into the space, being careful not to damage the tub, wall, plumbing or ledger board. Since bathtubs are very heavy and you will need to line the tub up exactly, it is wise to have someone help you with this step.

Once the tub is in place, it needs to be perfectly level, so use a bubble level instead of estimating how level the tub is. Put the level on the top edge of the tub, not the bottom on the inside, since many tubs are designed with a sloped bottom.

If the bathtub isn’t level, adjust the ledger board and shift the tub until it is. When it is level, use screws to attach the tub to the wall studs. Most bathtubs have pre-drilled holes in the upper flange, so use these but do not over tighten the screws.

 

Hook up the Plumbing

 

Now that the bathtub is installed, it needs to be attached to your plumbing system. First, install the shoe fitting under the tub and drain pipe, then the overflow pipe and then the drain flange. Your tub plumbing kit will include specific instructions on how to install these pieces.

 

Install the Bathtub Surround

 

A bathtub surround will protect the walls around the tub from water damage and can give your new bathtub a more finished look. To install one, make sure the wall is completely clean and dry so that the adhesive will be able to hold the surround securely. Then, measure the surround and mark the same dimensions on the wall above the tub.

Following the directions that came with the surround adhesive, apply it to the wall. Press the surround against the wall on top of the adhesive and then pull it away for about three minutes to activate the adhesive, then apply the surround again. Keep in mind that this is the most common way to use an adhesive, but you should check the instructions on the package for any special steps.

If there is any excessive adhesive around the sides of the surround, you can use mineral spirits to remove it. Then use masking tape to hold the surround panels in place until the adhesive is dry. Using silicone, seal all the cracks between the surround panels and the gap between the bottom of the panels and the top of the bathtub.

If you want to install tile above your bathtub, instead of a bathtub surround, the process will be very similar. But, you will need to measure and cut tiles and install each one individually, using tile spacers to make sure they are evenly spaced. You will then use grout to fill in the spaces between the tiles.

https://www.hss.com/blog/bathroom/a-step-by-step-guide-to-installing-a-bathtub/

 

We are very intrigued by How to Install a Bathtub Yourself and I really hope you liked the page. For those who enjoyed our article please be sure to pass it around. Thanks for your time invested reading it.

Schedule Now!

Visit My Web Page

 

 

Right here below you will find a good deal of professional details related to How to Install a Bathtub: Install an Acrylic Tub and Tub Surround.

Installing a tub isn't specifically brain surgery, but it does need strong plumbing, carpentry, as well as often, tiling abilities. Changing an old tub with a new one is also a reasonably hard project. If the old tub is conveniently obtainable, the task can move easily; if you have to open a wall surface to remove the old bathtub and place the brand-new bath tub, the task is much harder. In either instance, the task is within a home handyman's skills, although you will need an assistant to leave the old bathtub and also set in the new one. Ensure you have certified on your own for the work and also fit attempting it. Rather than working with a professional to take over a halfway-completed job, it is better to take into consideration using one prior to you start. Opportunities are you might need a professional plumber to make tube links.
This write-up will assist you mount a brand-new bath tub in your bathroom if you have actually currently acquired a brand-new bathtub and also do not require to change the plan of your previous water system pipes.
Your tools as well as material list ought to consist of the following:

 

• New Bath tub


• Hammer


• Pipeline Wrenches


• Prybar


• Shatterproof glass


• Degree


• Pliers


• Adjustable Wrench


• Putty Knife


• Screwdriver


• Cold Chisel


• Tape Measure


• Pipe Caps


 

Getting ready for the Setup

First of all, the sustaining framework provided with the bathroom should be fitted (if required) according to the maker's directions. Next off, fit the taps or mixer to the bath tub. When fitting the tap block, it is essential to ensure that if the tap comes with a plastic washer, it is fitted in between the bathroom and also the faucets. On a plastic bathroom, it is additionally reasonable to fit a supporting plate under the taps device to prevent strain on the bathtub.
Fit the adaptable tap connectors to the bottom of the two faucets making use of 2 nuts and also olives (occasionally provided with the bathtub). Fit the plug-hole electrical outlet by smearing mastic filler round the sink electrical outlet hole, and afterwards pass the outlet through the hole in the bath. Utilize the nut supplied by the maker to fit the plug-hole. Take a look at the plug-hole outlet for an inlet on the side for the overflow pipe.
Next off, fit completion of the versatile overflow pipe to the overflow electrical outlet. After that, screw the pipe to the overflow face which need to be fitted inside the bathroom. See to it you utilize every one of the supplied washing machines.
Attach the trap to the bottom of the waste outlet on the bath tub by winding the string of the waste outlet with silicone mastic or PTFE tape, and screw on the catch to the outlet. Link the bottom of the overflow tube in a comparable manner.The bath should currently prepare to be suited its final position.

 

 

Removing Old Touches

If you need to change old faucets with brand-new ones as a part of your installment, then the first thing you should do is separate the water system. After doing so, turn on the faucets to drain any water continuing to be in the system. The process of removing the existing faucets can be quite bothersome because of the restricted gain access to that is typically the situation.
Make use of a container wrench (crowsfoot spanner) or a tap device to reverse the nut that connects the supply pipelines to the taps. Have a cloth all set for the staying water that will certainly come from the pipes. When the supply pipes have actually been removed, make use of the same tool to loosen up the nut that holds the taps onto the bath/basin. You will certainly need to quit the single faucets from turning during this procedure. Once the taps have actually been eliminated, the holes in the bath/basin will certainly need to be cleaned of any type of old securing compound.
Prior to proceeding to fit the new taps, contrast the pipe links on the old taps to the new faucets. If the old faucets are longer than the brand-new faucets, then a shank adapter is needed for the new faucets to fit.

 

 

Mounting the Tub

Making use of the two wood boards under its feet, place the bathtub in the needed placement. The wooden boards are practical in uniformly spreading the weight of the tub over the area of the boards rather than concentrating all the weight onto four little factors.
The following goal is to guarantee that the bathtub is leveled all round. This can be achieved by inspecting the level and changing the feet on the bath tub till the spirit level reviews degree.
To install faucets, fit all-time low of the furthest flexible faucet adapter to the suitable supply pipeline by making a compression join; then do the very same for the various other tap.
Turn on the supply of water and also examine all joints as well as brand-new pipework for leakages and tighten them if required. Fill up the tub as well as additionally examine the overflow outlet and the typical outlet for leaks.
Lastly, take care of the bathroom paneling as described in the producer's user's manual. Tiling and also securing around the bath tub should wait until the bath tub has been used at least when as this will settle it into its last placement.

 

 

Suitable New Taps

If the tails of the new taps are plastic, then you will need a plastic port to avoid damage to the thread. One end of the port fits on the plastic tail of the tap as well as the other end supplies a link to the existent supply pipes.
If you need to fit a monobloc, then you will certainly call for minimizing couplers, which links the 10mm pipe of the monobloc to the common 15mm supply pipeline.
Next off, position the tap in the installing opening in the bath/basin making sure that the washers are in location between the tap and the sink. Safeguard the faucet in position with the producer given backnut. As soon as the tap is firmly in position, the supply pipes can be linked to the tails of the taps. The taps can either be connected by using corrugated copper piping or with typical faucet ports. The previous type should be linked to the faucet ends initially, tightening up only by hand. The supply pipelines can later on be attached to the various other end. Tighten both ends with a spanner after both ends have actually been connected.

 

 

Tiling Around the Bathtub

In the area where the bathroom meets the ceramic tile, it is essential to seal the joins with a silicone rubber caulking. This is very important as the installation can move sufficient to split a rigid seal, causing the water to permeate the wall between the bathroom and also the tiling, leading to problems with dampness and also feasible leaks to the ceiling below.
You can choose from a range of coloured sealants to assimilate your components as well as installations. They are offered in tubes and cartridges, and also can sealing voids up to a size of 3mm (1/8 inch). If you have a larger void to fill up, you can load it with spins of soaked paper or soft rope. Keep in mind to always fill up the bathtub with water before securing, to permit the motion experienced when the bathtub is in usage. The sealant can split relatively very early if you do not consider this activity before securing.
Alternatively, ceramic coving or quadrant ceramic tiles can be made use of to border the bathroom or shower tray. Plastic strips of coving, which are easy to use and also cut to dimension, are likewise conveniently readily available on the market. It is suggested to fit the ceramic tiles making use of water-resistant or water resistant adhesive and also grout.

 

A Step-by-Step Guide to Installing a Bathtub

 

Is your bathtub looking a bit dated lately? Believe it or not, installing a new one is a project you can do yourself. Whether your bathtub is broken or doesn’t fit in with your current bathroom’s design, you can fix it without having to hire a contractor or paying labour costs.

But, beyond saving money, there are other benefits of installing your own bathtub. When you do this project yourself, you can customise every step of the process. You can also make sure the finished product looks exactly the way you want it to.

This DIY project is quite involved, but by doing some research, preparing your bathroom and using the right equipment, it is definitely one you can take on. This guide will help you understand the technical procedures behind installing a new bathtub.

 

Remove the Existing Bathtub

 

To remove the old bathtub, you will need to turn the water supply off before you start any work. After you turn the water off, there will likely still be some water left in your plumbing system, which you can remove by turning on a faucet below the level of the bathtub. Once the water stops running, you are ready to start working.

The easiest way to remove the tub is to remove the faucet, handles and other piping and then pull the tub out from the wall. If this doesn’t work in your situation, you will need to remove part of the wall, remove the piping and then slide the tub out.

 

Choose the Right Bathtub

 

The ideal way to replace your bathtub is to find one that has the exact dimensions and has the drain and faucet on the same side as your old one. This way, it will fit in the same place and you won’t have to change the piping system in your bathroom. Choose a tub that matches your home’s decor and fits with the style of the bathroom.

 

Install the Plumbing and Ledger Board

 

You can purchase a tub drain kit at a hardware store which will have all the pieces you will need for your new tub’s plumbing. Follow the instructions that came with the kit to install the plumbing in the new tub and then take measurements to make sure the plumbing in the tub will align with the plumbing in your bathroom. If it doesn’t, now is the time to make necessary adjustments.

Some bathtubs need a ledger board that is installed on the wall behind the tub to help support it. If your new bathtub requires one, the directions that came with it will tell you how high it should be installed. If your old bathtub had a ledger board, and it is still in good condition, you can adjust its height to match the new bathtub.

 

Install the Bathtub

 

When the plumbing and ledger board are ready, you can install the new bathtub. Carefully lower it into the space, being careful not to damage the tub, wall, plumbing or ledger board. Since bathtubs are very heavy and you will need to line the tub up exactly, it is wise to have someone help you with this step.

Once the tub is in place, it needs to be perfectly level, so use a bubble level instead of estimating how level the tub is. Put the level on the top edge of the tub, not the bottom on the inside, since many tubs are designed with a sloped bottom.

If the bathtub isn’t level, adjust the ledger board and shift the tub until it is. When it is level, use screws to attach the tub to the wall studs. Most bathtubs have pre-drilled holes in the upper flange, so use these but do not over tighten the screws.

 

Hook up the Plumbing

 

Now that the bathtub is installed, it needs to be attached to your plumbing system. First, install the shoe fitting under the tub and drain pipe, then the overflow pipe and then the drain flange. Your tub plumbing kit will include specific instructions on how to install these pieces.

 

Install the Bathtub Surround

 

A bathtub surround will protect the walls around the tub from water damage and can give your new bathtub a more finished look. To install one, make sure the wall is completely clean and dry so that the adhesive will be able to hold the surround securely. Then, measure the surround and mark the same dimensions on the wall above the tub.

Following the directions that came with the surround adhesive, apply it to the wall. Press the surround against the wall on top of the adhesive and then pull it away for about three minutes to activate the adhesive, then apply the surround again. Keep in mind that this is the most common way to use an adhesive, but you should check the instructions on the package for any special steps.

If there is any excessive adhesive around the sides of the surround, you can use mineral spirits to remove it. Then use masking tape to hold the surround panels in place until the adhesive is dry. Using silicone, seal all the cracks between the surround panels and the gap between the bottom of the panels and the top of the bathtub.

If you want to install tile above your bathtub, instead of a bathtub surround, the process will be very similar. But, you will need to measure and cut tiles and install each one individually, using tile spacers to make sure they are evenly spaced. You will then use grout to fill in the spaces between the tiles.

https://www.hss.com/blog/bathroom/a-step-by-step-guide-to-installing-a-bathtub/

 

I stumbled upon that piece about A Step-by-Step Guide to Installing a Bathtub when exploring the web. Sharing is nice. One never knows, you may be doing someone a favor. Thank you for your time. Kindly pay a visit to our site back soon.

Get A Free Quote